Clasificación de aerogeneradores¶

Wind turbines are classified into different wind classes based on the maximum wind speeds they're designed to withstand. This classification system, defined by the International Electrotechnical Commission (IEC) standard 61400-1, helps match turbines to appropriate installation sites.

IEC Wind Classes¶

The main classification system uses four classes (I through IV), based on two key parameters:

Class I - Highest wind speeds

Average wind speed: 10 m/s (22 mph)

Texto disponible con la licencia

Texto disponible con la licencia

Extreme 50-year gust: 70 m/s (157 mph)
Designed for very high wind sites like exposed coastal areas

Class II - High wind speeds

Texto disponible con la licencia

Extreme 50-year gust: 59.5 m/s (133 mph)
Suitable for moderately exposed sites

Texto disponible con la licencia

Average wind speed: 7.5 m/s (17 mph)

Extreme 50-year gust: 52.5 m/s (117 mph)

Used for inland or less exposed locations

Texto disponible con la licencia

Class IV - Low wind speeds

Average wind speed: 6 m/s (13 mph)
Extreme 50-year gust: 42 m/s (94 mph)

Texto disponible con la licencia

There's also a Class S (Special) category for turbines with non-standard design parameters specified by the designer.

Operational Wind Speed Ranges¶

Additionally, turbines have three critical operational thresholds:

Cut-in speed: Minimum wind speed to start generating power (typically 3-4 m/s)

Texto disponible con la licencia

Texto disponible con la licencia

Rated speed: Wind speed at which maximum power output is reached (typically 12-16 m/s)
Cut-out speed: Maximum operational wind speed before the turbine shuts down for safety (typically 25 m/s or about 56 mph)

The cut-out speed protects the turbine from damage during storms, which is separate from the extreme wind speeds the structure must survive when shut down.